A desiccant dehumidifier is your ultimate
solution to tackling moisture in the summer. With the summers comes the mammoth
trouble of controlling moisture in industrial production units. There are
several options available for this problem however getting the most effective
and efficient solution is hard to come across. Desiccant humidifiers have been
able to solve the problem to a great extent as they have evolved into cost
effective and efficient methods in terms of controlling humidity in summer.
There are several reasons which make a desiccant rotor humidifier a better
product for controlling humidity than other methods.
Low
maintenance
A desiccant humidifier is the best technology
for maintaining a moisture free environment in the hot and humid summer. It
does this very effectively and efficiently.
It has resulted in a good managerial decision as well because even of a
temporary basis it has turned out to be effective on a short-term basis.
Energy
efficient
A desiccant rotor humidifier has been proven
to save more energy than a refrigerator when it comes to removing moisture from
the air. This is done with the aid of the smart technology used by humidifiers.
They use a low ambient control and they do not operate below the temperature of
45º.
Cost-
effective
A desiccant rotor humidifier solves the
problem of pestering humidity in the building. Apart from this it provides an
easy workable environment for the workers. This thereby leads to an improvement
of the quality of production and service.
Helps is
maintenance of structure
The removal of moisture helps in stopping the
process of decay of the industrial or plant structure leading to great savings
in structural repair and painting. The desiccant rotor humidifier has been
found to maintain excellent indoor quality of air. This is one of the effects
of installing a humidifier as it controls the air quality involuntarily without
affecting the system performance.
Non-requirement
of a defrost cycle
The desiccant humidifier with a rotor does
not require defrosting. This puts it at an advantage over other systems as the
process of defrosting can affect the production time. It is able to create very
low temperatures required for a high ambient temperature.
There are several steps to consider before
you deploying a desiccant humidifier in your industrial plant.
A sealed
area
In order to ensure effective functioning of
the desiccant humidifier, there has to be tight weather stripping. There should
be no holes on the exterior of the building. Another clever solution to exclude hindrances
for removal of humidity is to replace open and shut doors with revolving doors.
Reduce light
Excess light obstructs the process of reabsorbing
humidity thus creating a hindrance for the desiccant rotor humidifier. Light
reflecting from the walls, doors and windows causes problems with moisture. The
best idea is to seal the area and reduce or minimize the source of light.
Reduce
outdoor air inlets
Control of outdoor air is crucial for the
proper functioning of the desiccant humidifier. The best means of doing this is
through make-up air system.
No comments:
Post a Comment